Great product and works great.
FX-9 Blast Deflector V3
$6.00
Buy 2+ get 5% off | Buy 4+ get 10% off
- Description
- Shipping
- FAQs
- Product Care
NOTE: This product is prone to failure if installed incorrectly. We highly recommend purchasing at least two of this product in case of breakage. Ensure the hook side of the deflector is fully seated before pressing into place. Refer to the GIF image demonstrating proper installation.
Intended for use with the Freedom Ordinance FX-9 rifle, our FX-9 Blast Deflector V3 is especially useful for those who are left-handed. Our FX-9 Blast Deflector V3 blocks the majority of the gas blow-back from the rifle, making shooting the FX-9 much more tolerable for left-handed shooters.
Our newest iteration of our FX-9 Blast Deflector securely clips on to your picatinny rail with no additional hardware required. Simply align the hook side of your FX-9 Blast Deflector with an empty picatinny slot with available space on both sides (typically T7 and T8), and press into place.
What's in the box:
-
1 x FX-9 Blast Deflector V3
Flat rate tracked $8 USD shipping to the USA - free over $75 USD subtotal. Other destinations available at checkout.
After an order is submitted, it is estimated to take a minimum of 7-10 business days until your shipment is dispatched. Actual wait times may vary. Reach out to us at hello@oscardelta.co if you experience any trouble with your shipment.
Shipping rates for global customers available at checkout. Our products are declared as firearm accessories. To avoid delays and confiscation, ensure the legality of importation and use of our products prior to submitting an order. We are not responsible for customs seizures.
How are your products made?
Each of our products are designed and 3D printed in-house using a high-strength polymer.
Are your products durable?
Our products are 3D printed out of a heat-resistant PLA+, often chosen in the 3D2A community for its durability and strength.
Can I put in a custom order?
If you're interested in putting in a bulk order or are looking to becoming a reseller, please reach out to us at hello@oscardelta.co!
Our products are manufactured using 3D printed thermoplastic. Because of the limitations of our material and manufacturing process, proper care is required to keep your products working correctly.
Heat
Our products can weaken and deform under excess heat. This usually isn't an issue outside and during regular use, however extremely hot environments such as parked vehicles may lead to failures.
Installation
Proper care should be taken when installing our products. Always read the product description fully to understand the recommended installation procedure to avoid issues.
Customer Reviews
Overall rating: 4.3 / 5 from 37 reviews.
Great product. Works well. I had to modify it to fit my standard designed AR-9. I shaved down the inner side so it would fit flush and properly.
Fits perfect!!!
Does not fit a standard beveled AR pic rail. It is not deep enough, nor shaped properly to fit over the rail. Grinding the "inner, upper" surface to make it deeper to allow it to fit over the rail would render it too thin across the top to stay on. Useless product. I have more pictures.
Very impressed. Excellent fit. Fast shipping. Keep up the great work!
Solid deflector I mounted on my suppressed PSA AR-V build. Does a great job deflecting gasses and back pressure.
Great little deflector. The only option for left handed shooters I found
If it's very well good quality well made should last for a while
The product it’s great. It is a must have if you’re a left hand shooter. Also, the customer service provided was outstanding! I will definitely buy more from them.
Awesome custom engineered lil piece of plastic! I am a left handed shooter and this makes shooting my Freedom Ordnance FX9 all the more enjoyable! It blocks the flash from blinbing me and also redirects the casings away from my face. This will work on some other weapon platforms as well. I have a second blast deflector on a PCC that works just as good. If your weapon does not have the factory raised deflector already manufactured into the upper receiver I would take a look at buying 1 of these. All you need is a open picatinny rail slot on top just behind the ejection port and it will drop right on. The installation instructions that came with the deflector were spot on.
If your a lefty grab one !
Easy, clean install. The mounting holes line up perfectly. Hopefully I can get a range day in soon and test out the functionality.
Worth the wait. Will definitely help as a left hander.
I waited 2-3 months for the product
Installation was very easy, nice fitting on to the rail. Haven’t had time to test
The item does not fit on the FX 9 factory picatinny.
It fits great. The fit is really tight which I believe it a good thing. I did warm it just a bit before I installed it. I have not fired my rifle since I installed it but I believe it will work just fine.
Great!
I had to file it to get it to fit. I have not had a chance to run it yet.
Nice fitment and works well!
Doesn’t fit on the rail
Not the best price for the fit
Works great
The fibers of the face of the deflectors are not completely printed, and there a gap or small pitting. It works, but not sure about longevity.
Fast shipping. Great service !
Fits my Aero Precision EPC upper receiver perfectly 👍🏽
Fitting is very good. Can’t wait to test it on my next shooting session!
Haven't tested it as yet but I installed it on the rifle and it looks good
Good product and works as advertised.
Finally got to shoot with it installed today on my FX-9. I'm a lefty, so I was feeling some gas blow back in my face. Today I really felt no games, it works exactly as described & expected, very happy with it. Thanks for a great product.
Functions well and looks great on the FX9. Made it look and feel complete.
I have a Gen 1 FX-9 and this so far works pretty great.
Great quality print job with a good fit and finish. Works well and snaps into the rail perfectly. The second type that bolts to the receiver of the fx-9 is more of a sleek finish, but this one is easier to put on and off.
Looks great haven't shot it yet... v.1 just broke on me and this is a way sleeker look. V.2 looks great
Got the first version of the blast deflector (which in my opinion looks and functions better than V2) got it installed and took to the range- didn't last more than 40rds before an ejected shell clipped it and sheared the functional part from the mounted arm. Wrote to Oscar Delta about the issue and haven't heard back at all. The deflector worked great when not broken.... but its not durable at all in my experience. They shipped a prototype V2 with my original order so I have that for a backup at least (had to super glue my V1 and MAYBE that'll hold up.......) but for $20 including shipping and no response or way to return or refund my money, I can't recommend their product.
Fast shipping. Needed a little adjustment for a tight fit. It definitely reduces the amount of blow back on your face. Highly recommend.
Five stars Five stars