Works great, durable and adjustable
PSA AK-V Mag Coupler
$15.00
Buy 2+ get 5% off | Buy 4+ get 10% off
- Description
- Shipping
- FAQs
- Product Care
Clamp two PSA AK-V magazines together using our simple and durable PSA AK-V Mag Coupler. Our PSA AK-V Mag Coupler is intended for use with any carbine that accepts factory or aftermarket PSA AK-V magazines.
Insert your mags into the PSA AK-V Mag Coupler, tighten the included bolt until the mags no longer shift, and you're ready to shoot. Be sure to avoid overtightening your coupler to prevent warpage and failures.
The PSA AK-V Mag Coupler includes a bolt and thread, securely holding your magazines in place; our grip tape ensures that your magazines don't shift while in use.
Compatibility
- Compatible with any carbine or rifle that accepts standard width PSA AK-V magazines.
- Ensure there is 30mm or 1.2 inches of spacing below your mag well for installation. Our couplers may not work with flared mag wells or non-standard width magazines.
- Our mag couplers may be compatible with replica airsoft magazines, however have not been specifically tested.
What's in the box:
- 1x PSA AK-V Mag Coupler (with M4 nut)
- 1x M4 bolt
Flat rate tracked $8 USD shipping to the USA - free over $75 USD subtotal. Other destinations available at checkout.
After an order is submitted, it is estimated to take a minimum of 7-10 business days until your shipment is dispatched. Actual wait times may vary. Reach out to us at hello@oscardelta.co if you experience any trouble with your shipment.
Shipping rates for global customers available at checkout. Our products are declared as firearm accessories. To avoid delays and confiscation, ensure the legality of importation and use of our products prior to submitting an order. We are not responsible for customs seizures.
How are your products made?
Each of our products are designed and 3D printed in-house using a high-strength polymer.
Are your products durable?
Our products are 3D printed out of a heat-resistant PLA+, often chosen in the 3D2A community for its durability and strength.
Can I put in a custom order?
If you're interested in putting in a bulk order or are looking to becoming a reseller, please reach out to us at hello@oscardelta.co!
Our products are manufactured using 3D printed thermoplastic. Because of the limitations of our material and manufacturing process, proper care is required to keep your products working correctly.
Heat
Our products can weaken and deform under excess heat. This usually isn't an issue outside and during regular use, however extremely hot environments such as parked vehicles may lead to failures.
Installation
Proper care should be taken when installing our products. Always read the product description fully to understand the recommended installation procedure to avoid issues.
Customer Reviews
Overall rating: 4.9 / 5 from 31 reviews.
I bought 2 sets for my Scorpion and AK-V magazines, and both factory CZ and PSA magazines fit in these couplers very well and tight without having to crank down the screw. A surprise bonus: This coupler also worked for Stribog SPA magazines!
Mag coupler is made really solid. It's a little tight when using it for .40 s&w, but it fits really snug. So there's not wiggle room or slipping when in use. However, mine order did take awhile to get here after it was in the states. I won't why but it was stuck for.days in one spot. Other than faster shipping, this is a great pick up!
Works great as intended. I put them on some ETS mags in the photo, but they fit the better functioning PSA AKV mags perfectly.
Product I awesome. Still playing around with where I like it best, but how it’s picture is more than likely how I’ll run it. Couldn’t be happier. I recommend this 100%!!
Enjoy this product.
What can I say, I love them they fit perfectly on the magazines, the way these come out the finish is spectacular super easy to install, can’t say this enough I love them, Thanks Oscar Delta for a great product….
Very high quality and works perfectly! Extremely happy with my purchase!
Amazing product , so much better than I was expecting. I am going to order another . Very happy and I would definitely recommend.
Picked these up to bundle mags for my AKV. Loving these so far, will definitely be ordering a few more. This was my first time ordering from Oscar Delta and won’t be my last.
These couplers paired with long mags are a big part of why range days are so fun lately. Works great with Glock 33rd mags and the Extar EP9. Thank you for a great product.
Sturdy
Very pleased with this purchase. It's added some additional functionality to my platform that I was hoping to have
Worked like a charm even on the ets mags
Perfect! Exactly as advertised. Thank you!
Works really well
Very well made device.
As advertised!!!
Outstanding! Fit and finish is perfect 😁
Best for money AAA+++ I recommend this part to everyone.
Mag couplers work great! Awesome product overall.
Solid, works great with the Scorpion mags.
These mag couplers look and function fantastically. Kudos to Oscar Delta for these.
works great!!!
Coupler (s) capture dual magazines securely. Appears to be made very well, much like the Magpul version for the AR platform. Will order more. I lived in Canada for 16 years (Saskatchewan)and can attest to the pride and quality Canadians put into the products they manufacture.
great product, fit amazing and easy to use.
Works great! As advertised, will be picking up more in the future, well made, quick shipping just an all around great experience thanks OD
Great product. Mags fit tight together. Love the look
Excellent quality and fits perfectly.So good,I purchased two more
They work great Locked good and tight
Bought this coupler for my AKV mags and it fits perfect. It also looks bad to the bone. I love it.