The Mag Coupler is fantastic. Works perfectly and installs in seconds. Did I need it? No. Does it look cool? 100% yes. Now I feel like Lee Marvin in The Dirty Dozen.
Glock Mag Coupler (9mm/.40)
$15.00
Buy 2+ get 5% off | Buy 4+ get 10% off
- Description
- Shipping
- FAQs
- Product Care
Clamp two Glock magazines together using our simple and durable Glock Mag Coupler. Our Glock Mag Coupler is intended for use with pistol caliber carbines.
Insert your mags into the Glock Mag Coupler, tighten the included bolt until the mags no longer shift, and you're ready to shoot. Be sure to avoid overtightening your coupler to prevent warpage and failures.
The Glock Mag Coupler includes a bolt and thread, securely holding your magazines in place; our grip tape ensures that your magazines don't shift while in use.
Compatibility
- Our Glock Mag Coupler is compatible with most 9mm and .40 S&W Glock magazines including: Glock 17, 19, 22, 23, 26, 27, 31, 32, 33, 34, and 35 magazines.
- Ensure there is 30mm or 1.2 inches of spacing below your mag well for installation. Our couplers may not work with flared mag wells or non-standard width magazines.
- Our mag couplers may be compatible with replica airsoft magazines, however have not been specifically tested.
Looking for 10mm/.45 Glock mag couplers? Click here!
What's in the box:
- 1x Glock Mag Coupler (with M4 nut)
- 1x M4 bolt
Disclaimer
“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither Oscar Delta Co., nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of “GLOCK” on this page is merely to advertise the sale of products compatible with related products.
Flat rate tracked $8 USD shipping to the USA - free over $75 USD subtotal. Other destinations available at checkout.
After an order is submitted, it is estimated to take a minimum of 7-10 business days until your shipment is dispatched. Actual wait times may vary. Reach out to us at hello@oscardelta.co if you experience any trouble with your shipment.
Shipping rates for global customers available at checkout. Our products are declared as firearm accessories. To avoid delays and confiscation, ensure the legality of importation and use of our products prior to submitting an order. We are not responsible for customs seizures.
How are your products made?
Each of our products are designed and 3D printed in-house using a high-strength polymer.
Are your products durable?
Our products are 3D printed out of a heat-resistant PLA+, often chosen in the 3D2A community for its durability and strength.
Can I put in a custom order?
If you're interested in putting in a bulk order or are looking to becoming a reseller, please reach out to us at hello@oscardelta.co!
Our products are manufactured using 3D printed thermoplastic. Because of the limitations of our material and manufacturing process, proper care is required to keep your products working correctly.
Heat
Our products can weaken and deform under excess heat. This usually isn't an issue outside and during regular use, however extremely hot environments such as parked vehicles may lead to failures.
Installation
Proper care should be taken when installing our products. Always read the product description fully to understand the recommended installation procedure to avoid issues.
Customer Reviews
Overall rating: 4.8 / 5 from 192 reviews.
Looks really good and very well made
Cool mag coupler, feels solid and is a perfect compliment for my Ruger PC Carbine holding some 10-rnd Glock mags
The product is rock solid I have clamped two 30 round Glock magazines together However, your shipping times are atrocious those parts should’ve literally been here in a few days Over 7 weeks for delivery
This is a great quality coupler. Nice and sturdy. Great for my firearm. Will definitely be getting more couplers from this company. Highly recommend. Thumbs Up!!
Fits very well and well built
Loved it !
Nice fit Works perfectly
Absolutely awesome, I was concerned because it is 3d printed but damn this thing is solid! In the second photo you can see how much stronger and better made this is than his competition. In comparison I paid 10 dollars more for this one but it's easily 5x as strong and rigid than the other ones I have that are also printed, it took a while to get it because they had problems with billing etc but it was well worth the wait and he always responded to my emails and was understanding when I wasn't very understanding "started thinking I got scammed for a minute" but he made it right and I am so happy I didn't cancel my order. I will absolutely be recommending and supporting this company down the road I hope they do well because thier product is far superior to the competition! God bless!
Mag coupler is made really solid. It's a little tight when using it for .40 s&w, but it fits really snug. So there's not wiggle room or slipping when in use. However, mine order did take awhile to get here after it was in the states. I won't why but it was stuck for.days in one spot. Other than faster shipping, this is a great pick up!
For parts coming from Canada they came fairly fast and the price was fair. They’re perfect for my APC9 and with a aftermarket flared Magwell their gap between mags is just right to clear it. They seem pretty heavy duty too which is great! If you’re thinking about getting them for extended Glock mags like I did do it!! Worth it for the money. I have the Goliath Stick Mags that hold 60 rounds a piece and they’re firmly side by side now for fast reloads. Thanks for the great product!!!
I was very happy to find this when I searched for a Glock mag coupler. It's well made with some materials on the inside to not scratch the magazine which I like. It seems sturdy and holds the magazines well. I can't wait to try it out on my 9mm pcc. Great job Oscar Delta Co
Sweet mag coupler. Excellent craftsmanship and attention to detail. Now time to order my match saver!
Great product!
These 9mm mag couplers are very well made, small, light, holds mags very tight! Also, these work with the speed beez reloaded. I will be ordering more soon!
Factory feel build quality - would definitely order again from OD.
Great Product! Would purchase again!
A+ guys, I have put over 2k rounds through my AR9's and Ruger PCC's in the past week with no issues! I would recommend.
Fits great!
Works perfect with the GSG MP-40 (9mm) with GSG steel magazines. Very well made couplers.
Minty 👌
I’m really into 9mm carbines , since I got this glock magazine coupler I’m acstatic about them they are great ,fit perfectly on the mags , enough space between the mags that you don’t have to stagger them to able to insert them in your gun, as I said before fit and finish is impeccable….don’t wait get these now you won’t be disappointed.
Great coupler, but don't hold your breath on shipping. That was my only negative thing to say, took 3 weeks to get.
Great products and I am going to order more soon!
Love this concept had a AR15 mag coupler so I knew this was the way to go. Highly recommend!
Awesome product! Second one just purchased. Great to carry extra rounds on the AR9
Quality product from our northern brothers! I love it, really completes the look and functionality I was looking for!!
Works nice on my AR9
Works great! Thanks!
Super happy, installed real easy, and looks just freakin sweet!
I’ve used these on two occasions at the range, approximately 600 rounds in total. These couplers do not slip and are rock solid. They are very reasonably priced and arrived sooner than expected. I highly recommend these and plan on buying a few more for my other PCC.
Nice piece 🔥🔥
Amazing product , so much better than I was expecting. I am going to order another . Very happy and I would definitely recommend.
I work good you can have different figurations well made good material
Great coupler for the price
Great product, the grip tape on it makes a difference and works just like it's supposed to. Thanks
These couplers paired with long mags are a big part of why range days are so fun lately. Works great with Glock 33rd mags and the Extar EP9. Thank you for a great product.
Awesome construction and materials.. solid kit … will purchase again..
I should've thought of this... Oscar Delta excellent absolutely excellent product. I don't know anyone except a few people that has this coupler, but it turns firearm into a 66 round binary machine, which runs very stable, and the weight of the coupler with magazine helps with barrel flip tremendously. There's nothing bad I can say about this product whatsoever except that it's made in Canada😜
Allthingsgun